Asus Z170-Premium series Manual Download Page 51

Page: 51 / 190

ASUS Z170-PREMIUM Series

1-33

Chapter 1

2. ASMedia

Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12)

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.

•

ASMedia storage controller can only support AHCI mode.

•

These SATA ports are for data drives only.

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect

the S/PDIF Out module cable to this connector, then install the module to a slot

opening at the back of the system chassis.

The S/PDIF module is purchased separately.

Summary of Contents for Z170-Premium series































































































































































































Search results

Summary of Contents for Z170-Premium series

Reviews:

Related manuals for Z170-Premium series

Brands by name

Popular brands

Asus Z170-Premium series, Manual

Search results

Summary of Contents for Z170-Premium series

Reviews:

Related manuals for Z170-Premium series

Brands by name

Popular brands