Asus Z170-Premium series Manual Download Page 50

Page: 50 / 190

1-32

Chapter 1: Product Introduction

Chapter 1

1.2.9

Internal connectors

Intel

Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34; SATA

6G_56; SATAEXPRESS)

These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s

signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10

configuration with the Intel

Rapid Storage Technology through the onboard Intel

Z170 chipset.

•

These connectors are set to

[AHCI]

by default. If you intend to create a Serial ATA

RAID set using these connectors, set the SATA Mode Selection item in the BIOS to

[RAID]

. Refer to section

3.6.5 PCH Storage Configuration

for details.

•

Before creating a RAID set, refer to section

5.1 RAID configurations

or the manual

bundled in the motherboard support DVD.

•

The M.2 socket shares SATA ports with SATA Express. Only one SATA device could

be activated. To use an M.2 SATA device, refer to section

3.6.8 Onboard Devices

Configuration

regarding the BIOS switch.

•

The SATAEXPRESS connector can support one SATA Express device or two SATA

devices.

Summary of Contents for Z170-Premium series































































































































































































Search results

Summary of Contents for Z170-Premium series

Reviews:

Related manuals for Z170-Premium series

Brands by name

Popular brands

Asus Z170-Premium series, Manual

Search results

Summary of Contents for Z170-Premium series

Reviews:

Related manuals for Z170-Premium series

Brands by name

Popular brands