Asus Z11PA-U12 series, User Manual

Page: 53 / 164

2-33 Z11PA-U12 Series
11. EATX power connectors (24-pin EATXPWR, 8-pin EATX12V1)
These connectors are for the SSI or ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper orientation
and push down firmly until the connectors completely fit.
• DO NOT forget to connect the 24+8-pin power plugs when using 85W or below CPU;
otherwise, the system will not boot up.
• Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
• Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system.
12. LAN34_LED connector (5-1 pin LAN34_LED1)
These LEDs are for Gigabit LAN activity LEDs on the front panel. Connect the LAN
LED cable to the backplane for LAN activity indication.