Asus Z11PA-U12 series, User Manual

Page: 29 / 164

2-9 Z11PA-U12 Series
3. Align the triangle mark on the CPU with the
triangle mark on the CPU Carrier (A), then install
the CPU into the CPU Carrier until it clicks firmly
into place (B), and then install the CPU Carrier
into the heatsink until it clicks firmly in place (C).
Ensure that the triangle mark on the CPU
matches the triangle mark on the CPU Carrier.
Apply the Thermal Interface Material to the CPU
heatsink and CPU before you install the heatsink
and fan, if necessary.
4. Twist each of the four screws with a screwdriver
just enough to attach the heatsink to the
motherboard. When the four screws are attached,
tighten them one by one in a diagonal sequence
to completely secure the heatsink.
CPU Carrier
CPU
Triangle mark
The CPU and heatsink assembly fits in only one
correct orientation. DO NOT force the CPU and
heatsink assembly into the socket to prevent
damaging the CPU pins on the socket.
The heatsink screws are T30 models. A torque
value of 12 inch-lbf is recommended.