Asus W1J, Hardware User Manual

Page: 51 / 79

51
Using the Notebook PC
4
Thermal Power Control
There are three power control methods for controlling the Notebook PC’s thermal state. These power
control cannot be configured by the user and should be known in case the Notebook PC should enter
these states. The following temperatures represent the chassis temperature (not CPU).
• The fan turns ON for active cooling when the temperature reaches the safe upper limit.
• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.
• The system shut down for critical cooling when temperature exceeds the maximum safe upper
limit.
Power State Summary
STATE ENTRY EVENT EXIT EVENT
“Stand by”
• “Stand by” through Windows Start button
• Timer as set though “Power Management” in
Windows Control Panel (higher priority)
• Any device
• Battery low
STR (“Stand by”)
(Suspend-to-RAM)
• Hotkey (see “Colored Hotkeys” under “Special
Keyboard Functions” in the previous section)
• Signal from modem port
• Power button or any key
STD (“Hibernate”)
(Suspend-to-Disk)
• Hotkey (see “Colored Hotkeys” under “Special
Keyboard Functions” in the previous section)
• Power button
Soft OFF
• Power button (can be defined as STR or STD)
• “Shut down” through Windows Start button
• Power button