Asus UP-895MD Series User Manual Download Page 58

Page: 58 / 180

1-42

Chapter 1: Product introduction

Chapter 1

13. Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt

Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

14. T_Sensor connector (2-pin T_SENSOR1)

This connector is for the thermistor cable that allows you to monitor the temperature of

your motherboard’s critical components and connected devices.

The thermistor cable is purchased separately.

Summary of Contents for UP-895MD Series





















































































































































































Search results

Summary of Contents for UP-895MD Series

Reviews:

Related manuals for UP-895MD Series

Brands by name

Popular brands

Asus UP-895MD Series, User Manual

Search results

Summary of Contents for UP-895MD Series

Reviews:

Related manuals for UP-895MD Series

Brands by name

Popular brands