manualshive.com logo in svg

Asus UP-895MD Series, User Manual

Share
Download
Asus UP-895MD Series User Manual Download Page 141

ASUS Z97-PRO Series

3-63

Chapter 3

3.11.2  ASUS EZ Flash 2

ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk 

or an OS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website 

 

at www.asus.com.

To update the BIOS using EZ Flash 2:

1. 

Insert the USB flash disk that contains the latest BIOS file to the USB port.

2. 

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select 

ASUS EZ Flash Utility and press <Enter> to enable it.

3. 

Press <Tab> to switch to the Drive field.

4. 

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, 

and then press <Enter>. 

5. 

Press <Tab> to switch to the Folder Info field.

6. 

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform 

the BIOS update process. Reboot the system when the update process is done.

Summary of Contents for UP-895MD Series





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands