Asus UP-895MD Series User Manual Download Page 125

Page: 125 / 180

ASUS Z97-PRO Series

3-47

Chapter 3

3.6.10 Intel Rapid Storage Technology

Create RAID Volume

This item allows you to create a RAID volume.

This item only appears when at least one HDD is connected to the Intel

SATA ports and

set to RAID mode.

Name [Volume1]

This item allows you to key in a volume name for your RAID setup.

Use only alphanumeric characters for your RAID volume name. It should be 16 characters

or less.

RAID Level [RAID0(Stripe)]

This item allows you to select the RAID level.
Configuration options: [RAID0(Stripe] [RAID1(Mirror)] [RAID5(Parity)] [Recovery]

Select Disks

This item shows the connected SATA devices compatible for setting up RAID. On their

dropdown lists, select

to set up the RAID.

Strip Size: [32KB]

This item allows you to strip the size of your RAID setup.
Configuration options: [4KB] [8KB] [16KB] [32KB] [64KB] [128KB]

Capacity (MB): [0]

This item allows you to set the RAID capacity.

Summary of Contents for UP-895MD Series





















































































































































































Search results

Summary of Contents for UP-895MD Series

Reviews:

Brands by name

Popular brands

Asus UP-895MD Series, User Manual

Search results

Summary of Contents for UP-895MD Series

Reviews:

Brands by name

Popular brands