Asus UP-895MD Series User Manual Download Page 140

Page: 140 / 180

3-62

Chapter 3: BIOS setup

Chapter 3

3.11

Updating BIOS

The ASUS website publishes the latest BIOS versions to provide enhancements on system

stability, compatibility,and performance. However, BIOS updating is potentially risky. If

there is no problem using the current version of BIOS, DO NOT manually update the BIOS.

Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the

instructions in this chapter to update your BIOS when necessary.

Visit http://www.asus.com to download the latest BIOS file for this motherboard.

The following utilities allow you to manage and update the motherboard BIOS setup program.

EZ Update: Updates the BIOS in Windows

environment.

ASUS EZ Flash 2: Updates the BIOS using a USB flash drive.

ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a

USB flash drive when the BIOS file fails or gets corrupted.

ASUS BIOS Updater: Updates the BIOS in DOS environment using the motherboard

support DVD and a USB flash disk drive.

3.11.1 EZ Update

The EZ Update is a utility that allows you to update the motherboard BIOS in Windows

environment.

•

EZ Update requires an Internet connection either through a network or an ISP

(Internet Service Provider).

•

This utility is available in the support DVD that comes with the motherboard package.

•

Refer to section

4.4.3 EZ Update

of this user guide for more information.

Summary of Contents for UP-895MD Series





















































































































































































Search results

Summary of Contents for UP-895MD Series

Reviews:

Brands by name

Popular brands

Asus UP-895MD Series, User Manual

Search results

Summary of Contents for UP-895MD Series

Reviews:

Brands by name

Popular brands