ASUS TS700-E4/RX8
3-15
To connect the mini-SAS cable:
Plug in the mini-SAS cable to the
mini-SAS connector until the cable
lock snaps in place.
To disconnect the mini-SAS cable:
1. With your thumb, push down the
cable lock to release.
2. While still keeping your thumb’s
grip on the cable lock, carefully pull
away the cable from the connector
1
2
6. USB connector (10-1 pin USB34)
This connector is for USB 2.0 ports. Connect the USB module cable to
this connector, then install the module to a slot opening at the back of the
system chassis. This USB connector complies with USB 2.0 specification that
supports up to 480 Mbps connection speed.
The USB port module is purchased separately.
®
DSBF-D12 Series USB connector
USB34
Power
PIN1
USB PortA(-) USB PortA(+
)
GND
Power
USB PortB(-) USB PortB(+
)
GND
NC
