Asus TS300-E6 PS4 User Manual Download Page 34

Page: 34 / 168

Chapter 2: Hardware setup

2-14

2. Examine the chassis and ensure the

bay space is free of wires and other

obstructions.

3. Level the HDD module cage latch

counterclockwise.

4. Insert the HDD module cage into the

bay.

5. When the HDD module cage is

completed inserted, the cage latch

will be pushed back clockwise.

6. Lock the cage latch properly.

2.6.2

Installing the second HDD module cage (optional)

This server supports up to eight SAS hard disk drives by installing a second HDD

module cage and an ASUS PIKE RAID card.

This server comes with a 390W single power supply. When installing eight SAS

hard disk drives on the system, pay attention not to install other devices that

may exceed the maximum power output.

1. Release the screw of the front plate

and follow the direction of the arrow

to remove the front plate from the

server chassis.

Summary of Contents for TS300-E6 PS4









































































































































































Search results

Summary of Contents for TS300-E6 PS4

Reviews:

Related manuals for TS300-E6 PS4

Brands by name

Popular brands

Asus TS300-E6 PS4, User Manual

Search results

Summary of Contents for TS300-E6 PS4

Reviews:

Related manuals for TS300-E6 PS4

Brands by name

Popular brands