manualshive.com logo in svg

Asus TS300-E4, User Manual, Page: 118 / 224

Share
Download
Asus TS300-E4 User Manual Download Page 118

5-26

Chapter 5: BIOS setup

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy operating 

systems (OS). Setting to Auto allows the system to detect the presence of USB 

devices at startup. If detected, the USB controller legacy mode is enabled. If no 

USB device is detected, the legacy USB support is disabled. Configuration options: 

[Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full 

Speed (12 Mbps). Configuration options: [HiSpeed] [Full Speed]

BIOS EHCI Hand-Off [Enabled]

Allows you to enable or disable the BIOS EHCI hand-off support. 

 

Configuration options: [Disabled] [Enabled]

5.4.5 

USB Configuration

The items in this menu allows you to change the USB-related features. Select an 

item then press <Enter> to display the configuration options.

 Select Screen

  Select Item

+-  Change Option

F1  General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

BIOS SETUP UTILITY

        Advanced

USB Configuration

USB Devices Enabled:
 

    None

Legacy USB Support 

 

[Auto]

USB 2.0 Controller Mode   

[HiSpeed]

BIOS EHCI Hand-Off 

 

[Enabled]

  USB Mass Storage Device Configuration

Summary of Contents for TS300-E4

































































































































































































































Reviews:

No comments