Asus TS100-E7/PI4 User Manual Download

Page: 120 / 136

6-2

Chapter 6: Driver installation

6.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install

an operating system to the independent hard disk drive or bootable array. This

part provides instructions on how to install the RAID controller drivers during OS

installation.

6.1.1

Creating a RAID driver disk

The system does not include a floppy drive. You have to use a USB floppy drive

when creating a SATA RAID driver disk.

If you have created RAID sets with the LSI Software RAID configuration utility,

the boot priority of the SATA optical disk drive has to be manually adjusted.

Otherwise, the system will not boot from the connected SATA ODD.

A floppy disk with the RAID driver is required when installing Windows

Red Hat

Enterprise operating system on a hard disk drive that is included in

a RAID set. You can create a RAID driver disk in DOS (using the Makedisk

application in the support DVD).
To create a RAID driver disk in DOS environment
1. Place the motherboard support DVD in the optical drive.

2. Restart the computer, and then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support DVD.

Save your changes, and then exit the BIOS Setup.

4. Restart the computer. The Makedisk menu appears.

Create Driver Diskette Menu

C20X INTEL RAID Driver

C20X LSI RAID Driver

LSI 2008 SAS2 Driver

Write DMI

FreeDOS command prompt

Summary of Contents for TS100-E7/PI4









































































































































Search results

Summary of Contents for TS100-E7/PI4

Reviews:

Related manuals for TS100-E7/PI4

Brands by name

Popular brands

Asus TS100-E7/PI4, User Manual

Search results

Summary of Contents for TS100-E7/PI4

Reviews:

Related manuals for TS100-E7/PI4

Brands by name

Popular brands