Asus TS100-E7/PI4 User Manual Download

Page: 113 / 136

ASUS TS100-E7/PI4

5-29

5.3.4

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID.

Resetting a RAID volume hard disk drive deletes all internal RAID structure on

the drive.

To reset a RAID set hard disk drive:
1. From the utility main menu, select

3. Reset Disks to Non-RAID

and press

<Enter>. The following screen appears.

2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset,

and then press <Space> to select.

3. Press <Enter> to reset the RAID set drive(s). A confirmation message

appears.

4. Press <Y> to reset the drive(s) or press <N> to return to the utility main

menu.

Resetting RAID disk will remove its RAID structures

and revert it to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Port Drive Model Serial # Size Status

0 ST3160812AS 9LS0HJA4 149.0GB Member Disk

1 ST3160812AS 9LS0F4HL 149.0GB

Member Disk

Select the disks that should be reset.

[

↑↓

]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

[

RESET RAID DATA

]

Summary of Contents for TS100-E7/PI4









































































































































Search results

Summary of Contents for TS100-E7/PI4

Reviews:

Related manuals for TS100-E7/PI4

Brands by name

Popular brands

Asus TS100-E7/PI4, User Manual

Search results

Summary of Contents for TS100-E7/PI4

Reviews:

Related manuals for TS100-E7/PI4

Brands by name

Popular brands