Asus T3-P5945GC - T Series - 0 MB RAM User Manual Download

Page: 65 / 79

5-18

Chapter 5: BIOS setup

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the item shows

None.

5.4.1 USB Configuration

The items in this menu allow you to change the USB-related features.

Select an item then press <Enter> to display the configuration options.

USB Configuration

Module Version - 2.24.0-10.4

USB Devices Enabled:

None

USB Function

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller [Hispeed]

BIOS EHCI Hand-off

[Enabled]

USB Function [Enabled]

Allows you to enable or disable the USB host controllers.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy

operating systems (OS). Setting to Auto allows the system to detect the

presence of USB devices at startup. If detected, the USB controller legacy

mode is enabled. If no USB device is detected, the legacy USB support is

disabled. Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or

FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]

BIOS EHCI Hand-off [Enabled]

Allows you to enable or disable the enhanced host controller interface

(EHCI) hand-off support. This is a workaround for operating systems

without EHCI hand-off support. The ECHI ownership change should be

claimed by the EHCI driver. Configuration options: [Disabled] [Enabled]

Summary of Contents for T3-P5945GC - T Series - 0 MB RAM
















































































Search results

Summary of Contents for T3-P5945GC - T Series - 0 MB RAM

Reviews:

Related manuals for T3-P5945GC - T Series - 0 MB RAM

Brands by name

Popular brands

Asus T3-P5945GC - T Series - 0 MB RAM, User Manual

Search results

Summary of Contents for T3-P5945GC - T Series - 0 MB RAM

Reviews:

Related manuals for T3-P5945GC - T Series - 0 MB RAM

Brands by name

Popular brands