background image

5 - 6

5 - 6

5 - 6

5 - 6

5 - 6

C h a p t e r   5 :   B I O S   s e t u p

C h a p t e r   5 :   B I O S   s e t u p

C h a p t e r   5 :   B I O S   s e t u p

C h a p t e r   5 :   B I O S   s e t u p

C h a p t e r   5 :   B I O S   s e t u p

5.

The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.

A:\>afudos /iA8R4T.ROM
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2003 American Megatrends, Inc. All rights reserved.

WARNING!! Do not turn off power during flash BIOS
Reading file ..... done
Reading flash .... done
Search bootblock version
Advance Check.........
Erasing flash ..... done
Writing flash ..... done
Verifying flash ... done

Please restart your computer

A:\>

5.1.4

5.1.4

5.1.4

5.1.4

5.1.4

ASUS CrashFree BIOS 2 utility

ASUS CrashFree BIOS 2 utility

ASUS CrashFree BIOS 2 utility

ASUS CrashFree BIOS 2 utility

ASUS CrashFree BIOS 2 utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS file when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS file using the motherboard
support CD or the floppy disk that contains the updated BIOS file.

Recovering the BIOS from a floppy disk

Recovering the BIOS from a floppy disk

Recovering the BIOS from a floppy disk

Recovering the BIOS from a floppy disk

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

1.

Turn on the system.

2.

Insert the floppy disk with the original or updated BIOS file to the
floppy disk drive.

Prepare the motherboard support CD or the floppy disk containing
the updated motherboard BIOS before using this utility.

Make sure that you rename the original or updated BIOS file in the
floppy disk to A 8 R 4 T . R O M

A 8 R 4 T . R O M

A 8 R 4 T . R O M

A 8 R 4 T . R O M

A 8 R 4 T . R O M.

Summary of Contents for T2-AH1



























































































































Reviews: