Asus STRIX Z270G GAMING, Manual, Page: 32 / 106

1-16 Chapter 1: Product Introduction
C
h
ap
te
r
1
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
6. USB 2.0 connectors (10-1 pin USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to these
connectors, then install the module to a slot opening at the back of the system chassis.
This USB connector complies with USB 2.0 speci cation that supports up to 480 Mb/s
connection speed.
7. Thermal sensor connector (2-pin T_SENSOR)
This connector is for the thermistor cable that monitors the temperature of the devices
and the critical components inside the motherboard. Connect the thermistor cable
and place the sensor on the device or the motherboard s component to detect its
temperature.