Asus ST555, User Manual

Page: 28 / 35

ST555
21
Example: 5 x 5 screen matrix (25 displays)
H MONITORS = 5 displays
V MONITORS = 5 displays
H monitors
V monitors
Position
1 2
6 7
3 4
8 9
5
10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
• H MONITORS - Select the number of displays on the horizontal
side.
• V MONITORS - Select the number of displays on the vertical side.
• POSITION - Select the position of this display in the screen matrix.
• FRAME COMP. - Choose to turn the frame compensation
function on or off. If turned on, the display will adjust the image
to compensate for the width of the display bezels in order to
accurately display the image.
• ENABLE: Choose to enable or disable the Tiling function. If
enabled, the display will apply the settings in {H MONITORS},
{V MONITORS}, {POSITION}, and {FRAME COMP.}.
NOTE: The Tiling function will be disabled when the [ON/OFF]
button for PIP is pressed.
POWER ON DELAY
Select the delayed time until the power-on mode is activated after the
power is turned on manually or automatically. This setting is useful in
hiding start-up messages and powering on the connected devices at
different timings.
The options are: {OFF}, {2 SEC.}, {4 SEC.}, {6 SEC.}, {8 SEC.}, {10 SEC.},
{20 SEC.}, {30 SEC.}, {40 SEC.}, {50 SEC.}.
CLOSED CAPTION
Choose to display or hide captions.
NOTE: This item is functional for VIDEO input only.
• {OFF} - Captions are hidden.
• {CC1} - Captions are displayed in sync with the primary audio.
• {CC2} - Information (related to the primary audio) is displayed
without sync.
• {CC3} - Captions are displayed in sync with the secondary audio.
• {CC4} - Information (related to the secondary audio) is displayed
without sync.
• {TT1 / TT2 / TT3 / TT4} - Four types of information not related to
the displayed images are displayed. (For example, news and weather
forecast.)
NOTE: Check with each supplier of your video software and external
video devices in advance whether they are compliant with
EIA-608-A. If their video signals are not compliant with it,
images may not be displayed correctly.
CONFIGURATION2 RESET
Reset all settings in the CONFIGURATION2 menu to factory preset
values.
4.2.7. CONFIGURATION3 menu
PIP
1
2
3
SET EXIT MENU
3
:SEL :NEXT
POWER SAVE
HEAT STATUS
SCREEN SAVER
SIDE BORDER COLOR
CONFIGURATION3 RESET
CONFIGURATION3
:RETURN :EXIT MENU
51
POWER SAVE
Set the display to reduce the power automatically.
EXIT MENU
:SEL +-:ADJ :RETURN :EXIT MENU
POWER SAVE
RGB
VIDEO
ON
ON
• {RGB} - Select {ON} to let the display enter APM mode with no
signal detected from the HDMI Graphic mode, HDMI, DVI-D, or
VGA inputs after three successive cycles.
• {VIDEO} - Select {ON} to let the display enter power saving mode
with no signal detected from the HDMI Video mode or YPbPr
inputs after three successive cycles.
HEAT STATUS
This function allows you to check the thermal status of the display at
any time.
EXIT MENU
:RETURN :EXIT MENU
HEAT STATUS
COOLING FAN 1
COOLING FAN 2
BRIGHTNESS
OFF
OFF
NORMAL
TEMPERATURE:
SENSOR 1
SENSOR 2
35.7 C / 96.2 F
30.2 C / 86.3 F
SCREEN SAVER
Choose to enable the panel saving functions to reduce the risk of the
“image persistence”.
EXIT MENU
:SEL +-:ADJ :RETURN :EXIT MENU
SCREEN SAVER
COOLING FAN
BRIGHTNESS
MOTION
AUTO
OFF
OFF