Asus Sabertooth X99 User Manual Download Page 53

Page: 53 / 186

ASUS SABERTOOTH X99

1-37

Chapter 1

12. Thunderbolt header (5-pin TB_HEADER)

This connector is for the add-on Thunderbolt I/O card that supports

Intel

’s Thunderbolt

Technology, allowing you to connect up to six Thunderbolt-enabled devices and a

DisplayPort-enabled display in a daisy-chain configuration.

The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.

13. M.2 socket 3

This socket allows you to install an M.2 (NGFF) SSD module.

•

This socket supports M Key and type 2242/2260/2280 storage devices.

•

The M.2 Socket 3 shares bandwidth with PCIe x16_3 slot. Refer to section

3.6.3 PCH

Storage Configuration

of this user guide for more details.

The M.2 (NGFF) SSD module is purchased separately.

Summary of Contents for Sabertooth X99



























































































































































































Search results

Summary of Contents for Sabertooth X99

Reviews:

Asus Sabertooth X99, User Manual, Page: 53 / 186

Search results

Summary of Contents for Sabertooth X99

Reviews: