manualshive.com logo in svg

Asus Sabertooth X99, User Manual, Page: 45 / 186

Share
Download
Asus Sabertooth X99 User Manual Download Page 45

ASUS SABERTOOTH X99

1-29

Chapter 1

2. 

USB 3.0 connector (20-1 pin USB3_12, USB3_34)

These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front 

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of 

USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for 

USB-chargeable devices, optimized power efficiency, and backward compatibility with 

USB 2.0.

The USB 3.0 module is purchased separately.

• 

Ensure to install the related driver to fully use the USB 3.0 ports under Windows

®

 7.

• 

Theplugged USB 3.0 device may run on xHCi or EHCl mode depending on the 

operating system’s setting.

• 

These USB 3.0 ports support native UASP transfer standard in Windows

®  

8 / 

Windows

®  

8.1 and Turbo Mode when using USB 3.1 Boost feature.

Summary of Contents for Sabertooth X99



























































































































































































Reviews:

No comments