Asus SABERTOOTH P67 User Manual Download Page 35

Page: 35 / 120

ASUS SABERTOOTH P67

2-17

Chapter 2

Marvell

Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

•

The SATA6G_E1/E2 (gray) connectors are for data drives only. ATAPI device is not

supported.

• You must install Windows

XP Service Pack 3 or later versions before using Serial ATA

hard disk drives.

• When using hot-plug and NCQ, set the

Marvell Storage Controller

item in the BIOS

to [Enabled]. Refer to section 3.5.6 Onboard Devices Configuration for details.

Serial port connector (10-1 pin COM1)

This connector is for a serial (COM) port. Connect the serial port module cable to this

connector, then install the module to a slot opening at the back of the system chassis.

The COM module is purchased separately.

Summary of Contents for SABERTOOTH P67

























































































































Search results

Summary of Contents for SABERTOOTH P67

Reviews:

Related manuals for SABERTOOTH P67

Brands by name

Popular brands

Asus SABERTOOTH P67, User Manual

Search results

Summary of Contents for SABERTOOTH P67

Reviews:

Related manuals for SABERTOOTH P67

Brands by name

Popular brands