Asus RS720-E9 Series User Manual Download Page 150

Page: 150 / 194

5-42

Chapter 5: BIOS Setup

Bootup NumLock State [On]

Allows you to select the power-on state for the NumLock.

Configuration options: [Off] [On]

Boot Logo Display [Auto]

Allows you to enable or disable the full screen logo display feature.

Configuration options: [Auto] [Full Screen] [Disabled]

POST Report [5 sec]

Allows you to set the desired POST Report waiting time from 1 to 10 seconds.

Configuration options: [1 sec] ~ [10 sec] [Until Press ESC]

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The

number of device items that appears on the screen depends on the number of devices

installed in the system.

•

To select the boot device during system startup, press <F8> when ASUS Logo

appears.

•

To access Windows OS in Safe Mode, please press <F8> after POST.

Hard Drive / CD/DVD ROM Drive / Network Device BBS Priorities

These items appear allow you to set the order of the legacy devices in this group.

5.11

Boot menu

The Boot menu items allow you to change the system boot options.

Summary of Contents for RS720-E9 Series



































































































































































































Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands

Asus RS720-E9 Series, User Manual

Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands