Asus RS720-E9 Series User Manual Download Page 146

Page: 146 / 194

5-38

Chapter 5: BIOS Setup

5.8

Event Logs menu

The Event Logs menu items allow you to change the event log settings and view the system

event logs.

5.8.1

Change Smbios Event Log Settings

Press <Enter> to change the Smbios Event Log configuration.

Enabling/Disabling Options

Smbios Event Log [Enabled]

Change this to enable or disable all features of Smbios Event Logging during boot.

Configuration options: [Disabled] [Enabled]

Erasing Settings

Erase Event Log [No]

Choose options for erasing Smbios Event Log. Erasing is done prior to any logging activation

during reset.

Configuration options: [No] [Yes, Next reset] [Yes, Every reset]

5.8.2

View Smbios Event Log

Press <Enter> to view all smbios event logs.

All values changed here do not take effect until computer is restarted.

Summary of Contents for RS720-E9 Series



































































































































































































Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands

Asus RS720-E9 Series, User Manual

Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands