Asus RS720-E9 Series User Manual Download Page 100

Page: 100 / 194

Chapter 4: Motherboard Information

4-18

10. Auxiliary panel connector (20-2 pin AUX_PANEL1, 20-pin AUX_PANEL2)

This connector is for additional front panel features including front panel SMB, locator

LED and switch, chassis intrusion, and LAN LEDs.

1. Front panel SMB (6-1 pin FPSMB)

These leads connect the front panel SMBus cable.

2. LAN activity LED (2-pin LAN1_LED, LAN2_LED)

These leads are for the Gigabit LAN activity LEDs on the front panel.

3. Locator LED (2-pin LOCATORLED1, 2-pin LOCATORLED2)

These leads are for the locator LED1 and LED2 on the front panel. Connect the

Locator LED cables to these 2-pin connector. The LEDs will light up when the

Locator button is pressed.

4. Locator Button/Switch (2-pin LOCATORBTN)

These leads are for the locator button on the front panel. This button queries the

state of the system locator.

5. LAN activity LED and USB port (2-pin LAN3_LED, LAN4_LED, USB ports)

These leads are for the Gigabit LAN activity LEDs and USB ports on the front

panel.

Summary of Contents for RS720-E9 Series



































































































































































































Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands

Asus RS720-E9 Series, User Manual

Search results

Summary of Contents for RS720-E9 Series

Reviews:

Related manuals for RS720-E9 Series

Brands by name

Popular brands