Asus RS320Q-E7 RS12 User Manual Download Page 136

Page: 136 / 158

7-8

Chapter 7: Driver installation

Red Hat

Enterprise Linux OS 4.7/4.8

To install the RAID controller driver when installing Red Hat

Enterprise OS:

Boot the system from the Red Hat

OS installation CD.

At the

boot:

, type

linux dd

Press <Enter>.

- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.

[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]

boot: linux dd

Select Yes using the <Tab> key when asked if you have the driver disk, then press

<Enter>.

Main Menu

Do you have a driver disk?

Yes

Press <Enter> to continue.

Insert Driver Disk

Insert your driver disk into /dev/sda

and press “OK” to continue.

Cancel

Summary of Contents for RS320Q-E7 RS12































































































































































Search results

Summary of Contents for RS320Q-E7 RS12

Reviews:

Asus RS320Q-E7 RS12, User Manual, Page: 136 / 158

Search results

Summary of Contents for RS320Q-E7 RS12

Reviews: