Asus RS320Q-E7 RS12 User Manual Download Page 134

Page: 134 / 158

7-6

Chapter 7: Driver installation

Insert the RAID driver disk you created earlier to the USB floppy disk drive, then press

<Enter>.

Select the RAID controller driver you need from the list, then press <Enter>.

The Windows

Setup loads the RAID controller drivers from the RAID driver disk. When

prompted, press <Enter> to continue installation.

Setup then proceeds with the OS installation. Follow screen instructions to continue.

To an existing Windows

Server OS

To install the RAID controller driver on an existing Windows

Server OS

Restart the computer, and then log in with

Administrator

privileges.

Windows

automatically detects the RAID controller and displays a

New Hardware

Found

window. Click

Cancel

Right-click the

My Computer

icon on the Windows

desktop, and then select

Properties

from the menu.

Click the

Hardware

tab, and then click the

Device Manager

button to display the list of

devices installed in the system.

Right-click the

RAID controller

item, then select

Properties

Click the

Driver

tab, and then click the

Update Driver

button.

The

Upgrade Device Driver Wizard

window appears. Click

Next

Insert the RAID driver disk you created earlier to the USB floppy disk drive.

Select the option

Install the software automatically (Recommended)

, and then click

Next

10. The wizard searches the RAID controller drivers. When found, click

Next

to install the

drivers.

11. Click

Finish

after the driver installation is done.

ENTER=Continue ESC=Cancel F3=Exit

Windows Setup

Please insert the disk labelled

Manufacturer-supplied hardware support disk

into Drive A:

* Press ENTER when ready.

Summary of Contents for RS320Q-E7 RS12































































































































































Search results

Summary of Contents for RS320Q-E7 RS12

Reviews:

Asus RS320Q-E7 RS12, User Manual, Page: 134 / 158

Search results

Summary of Contents for RS320Q-E7 RS12

Reviews: