manualshive.com logo in svg

Asus RS320Q-E7 RS12, User Manual, Page: 124 / 158

Share
Download
Asus RS320Q-E7 RS12 User Manual Download Page 124

6-30

Chapter 6: RAID configuration

6.3.4 

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a 

RAID volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1. 

From the utility main menu, select 

3. Reset Disks to Non-RAID

 and press <Enter>. 

The following screen appears.

2. 

Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then 

press <Space> to select.

3. 

Press <Enter> to reset the RAID set drive(s). A confirmation message appears.

4. 

Press <Y> to reset the drive(s) or press <N> to return to the utility main menu.

      Resetting RAID disk will remove its RAID structures

      and revert it to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

 

(This does not apply to Recovery volumes)
Port Drive Model      Serial #         Size   Status

0    ST3160812AS      9LS0HJA4      149.0GB   Member Disk

1    ST3160812AS      9LS0F4HL      149.0GB   

Member Disk

Select the disks that should be reset.

[

↑↓

]-Previous/Next  [SPACE]-Selects [ENTER]-Selection Complete

[

 

RESET RAID DATA

 

]

Summary of Contents for RS320Q-E7 RS12































































































































































Reviews:

No comments