A S U S R S 2 6 0 - E 3
A S U S R S 2 6 0 - E 3
A S U S R S 2 6 0 - E 3
A S U S R S 2 6 0 - E 3
A S U S R S 2 6 0 - E 3
6 - 5
6 - 5
6 - 5
6 - 5
6 - 5
6.2.1
6.2.1
6.2.1
6.2.1
6.2.1
Configuring the SCSI controller
Configuring the SCSI controller
Configuring the SCSI controller
Configuring the SCSI controller
Configuring the SCSI controller
You need to configure the SCSI controller before creating a RAID set. After
selecting the SCSI channel to use, the utility prompts you to select from the
available options. Use the arrow keys to select C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I
C o n f i g u r e / V i e w S C S I
C o n t r o l l e r S e t t i n g s
C o n t r o l l e r S e t t i n g s
C o n t r o l l e r S e t t i n g s
C o n t r o l l e r S e t t i n g s
C o n t r o l l e r S e t t i n g s, then press <Enter>.
6.2.2
6.2.2
6.2.2
6.2.2
6.2.2
Enabling the HostRAID controller
Enabling the HostRAID controller
Enabling the HostRAID controller
Enabling the HostRAID controller
Enabling the HostRAID controller
To enable the Adaptec HostRAID controller:
1.
Use the arrow keys to select the H o s t R A I D
H o s t R A I D
H o s t R A I D
H o s t R A I D
H o s t R A I D item in the Configuration
section.
2.
Press <Enter> to set the item to E n a b l e d
E n a b l e d
E n a b l e d
E n a b l e d
E n a b l e d.
3.
Press <Esc> to exit.
4.
When the utility prompts you to
save the changes, select Y e s
Y e s
Y e s
Y e s
Y e s,
then press <Enter>.
