Asus Republic of Gamers GT-AC2900 User Manual Download Page 11

Page: 11 / 179

1.4 Your wireless router

WAN (Internet) LED

Off

: No IP or no physical connection.

: Has physical connection to a wide area network (WAN).

2.4GHz / 5GHz Wi-Fi LED

Off

: No 2.4GHz / 5GHz signal.

: Wireless system is ready.

ROG Boost Key

Press this button to change the Aura lighting effects or turn on/off Game

Boost, DFS channels and GeForce Now QoS.

Reset button

This button resets or restores the system to its factory default settings.

Wi-Fi On/Off button

Press this button to turn on /off the Wi-Fi connection.

WPS button

This button launches the WPS Wizard.

LED On/Off button

Press this button to turn on/off the Aura lighting.

Summary of Contents for Republic of Gamers GT-AC2900




















































































































































































Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands

Asus Republic of Gamers GT-AC2900, User Manual

Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands