Asus Republic of Gamers GT-AC2900 User Manual Download Page 121

Page: 121 / 179

121

3. Set a static IP on your computer and use the following to set up

your TCP/IP settings:

IP address

: 192.168.1.x

Subnet mask

: 255.255.255.0

4. From your computer’s desktop, click

Start

All Programs

ASUS Utility GT-AC2900 Wireless

Router

Firmware Restoration

5. Specify a firmware file, then click

Upload

NOTE

: This is not a firmware upgrade utility and cannot be used on

a working ASUS Wireless Router. Normal firmware upgrades must be

done through the web interface. Refer to

Chapter 4: Configuring

the Advanced Settings

for more details.

5.3 Setting up your printer server

5.3.1 ASUS EZ Printer Sharing

ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.

Summary of Contents for Republic of Gamers GT-AC2900




















































































































































































Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands

Asus Republic of Gamers GT-AC2900, User Manual

Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands