Asus Republic of Gamers GT-AC2900 User Manual Download Page 119

Page: 119 / 179

119

5 Utilities

NOTES:

• Download and install the wireless router's utilities from the ASUS

website:

• Device Discovery v1.4.7.1 at

http://dlcdnet.asus.com/pub/ASUS/

LiveUpdate/Release/Wireless/Discovery.zip

• Firmware Restoration v1.9.0.4 at

http://dlcdnet.asus.com/pub/

ASUS/LiveUpdate/Release/Wireless/Rescue.zip

• Windows Printer Utility v1.0.5.5 at

http://dlcdnet.asus.com/pub/

ASUS/LiveUpdate/Release/Wireless/Printer.zip

• The utilities are not supported on MAC OS.

5.1 Device Discovery

Device Discovery is an ASUS WLAN utility that detects an ASUS
wireless router device, and allows you to configure the wireless
networking settings.

To launch the Device Discovery utility:

• From your computer’s desktop, click

Start

All Programs

ASUS Utility

ASUS Wireless Router

Device Discovery

NOTE:

When you set the router to Access Point mode, you need to

use Device Discovery to get the router’s IP address.

Summary of Contents for Republic of Gamers GT-AC2900




















































































































































































Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands

Asus Republic of Gamers GT-AC2900, User Manual

Search results

Summary of Contents for Republic of Gamers GT-AC2900

Reviews:

Related manuals for Republic of Gamers GT-AC2900

Brands by name

Popular brands