Asus Rampage Extreme - Motherboard - ATX User Manual Download Page 53

Page: 53 / 188

ROG Rampage Extreme

2-23

5. Line In port (light blue).

This port connects the tape, CD, DVD player, or

other audio sources.

6. Line Out port (lime).

This port connects a headphone or a speaker. In

4-channel, 6-channel, and 8-channel configuration, the function of this port

becomes Front Speaker Out.

7. Microphone port (pink).

This port connects a microphone.

8. Center/Subwoofer port (orange).

This port connects the center/subwoofer

speakers.

9. Rear Speaker Out port (black).

This port connects the rear speakers on a

4-channel, 6-channel, or 8-channel audio configuration.

10. Side Speaker Out port (gray).

This port connects the side speakers in an

8-channel audio configuration.

Refer to the audio configuration table on the next page for the function of the

audio ports in 2, 4, 6, or 8-channel configuration.

Audio 2, 4, 6, or 8-channel configuration

Port

Headset

2-channel 4-channel

6-channel

8-channel

Light Blue Line In

Line In

Lime

Line Out

Front Speaker Out Front Speaker Out

Front Speaker Out

Pink

Mic In

Orange

–

Center/Subwoofer

Black

–

Rear Speaker Out

Rear Speaker Ou

Rear Speaker Out

Gray

–

Side Speaker Out

11. Coaxial S/PDIF Out port.

This port connects an external audio output device

via a coaxial S/PDIF cable.

12. Optical S/PDIF Out port.

This port connects an external audio output device

via an optical S/PDIF cable.

13. USB 2.0 ports 1 and 2.

These 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

14.

External SATA port

. This port connects to an external Serial ATA hard disk

drive.

DO NOT insert a SATA connector into this external SATA port.

15. USB 2.0 ports 3 and 4.

These 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

16. Clear CMOS switch.

Press the clear CMOS switch to clear setup information

when the system hangs due to overclocking.

17. USB 2.0 ports 5 and 6.

These 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

Summary of Contents for Rampage Extreme - Motherboard - ATX





























































































































































































Search results

Summary of Contents for Rampage Extreme - Motherboard - ATX

Reviews:

Related manuals for Rampage Extreme - Motherboard - ATX

Brands by name

Popular brands

Asus Rampage Extreme - Motherboard - ATX, User Manual

Search results

Summary of Contents for Rampage Extreme - Motherboard - ATX

Reviews:

Related manuals for Rampage Extreme - Motherboard - ATX

Brands by name

Popular brands