3-28
Chapter 3: BIOS setup
Marvell IDE/eSATA [Legacy Mode]
Allows you to enable or disable the onboard Marvell IDE/eSATA controller.
Configuration options: [Legacy Mode] [Disabled]
IDE/eSATA Boot ROM [Enabled]
This item appears only when you set the previous item to [Legacy Mode].
Configuration options: [Disabled] [Enabled]
Speeding HDD Control [Auto]
Allows you to enable or disable the
SPEEDING HDD1
and
SPEEDING HDD2
ports. Configuration options: [Auto] [Enabled] [Disabled]
Speeding HDD Mode Update [Current setting]
Set this item to [Mode change] to show further settings of the Speeding HDD
feature. Configuration options: [Current setting] [Mode change]
The following three items appear when you set
Speeding HDD Mode Update
to [Mode change].
Update To Super Speed [Press Enter]
Allows you to use
Super Speed
function. Connect two identical SATA hard
drives to the
SPEEDING HDD1
and
SPEEDING HDD2
ports, and then press
the <Enter> key.
Update To EZ Backup [Press Enter]
Allows you to use
EZ Backup
function. Connect two identical SATA hard
drives to the
SPEEDING HDD1
and
SPEEDING HDD2
ports, and then press
the <Enter> key.
•
Back up your data stored in these two SATA hard drives before using
Speeding HDD function
. In
EZ Backup
mode, data stored in the drive
connected to
SPEEDING HDD2
port will be erased. In
Super Speed
mode,
data stored in both drives will be erased.
• Refer to
4.3.11 ROG Speeding HDD
for more information.
Update To Normal Mode [Press Enter]
In this mode, both
SPEEDING HDD1
and
SPEEDING HDD2
ports function
as ordinary SATA ports.
Summary of Contents for Rampage Extreme - Motherboard - ATX
Page 1: ...Motherboard Rampage Extreme ...
Page 16: ...xvi ...
Page 128: ...3 48 Chapter 3 BIOS setup ...
