2-28
Chapter 2: RAID configuration
•
Select Size:
Specify the size of the virtual drive in terabytes, gigabytes,
megabytes, or kilobytes. Normally, this would be the full size for RAID 60
shown in the Configuration panel on the right. You may specify a smaller
size if you want to create other virtual drives on the same drive group.
15. Click
Accept
to accept the changes to the virtual drive definition, or click
Reclaim
to undo the changes.
16. Click
Yes
to confirm the write policy mode you have chosen.
17. Click
Next
when you are finished defining virtual drives. The configuration
preview screen appears.
18. Check the information in the configuration preview.
19. If the virtual drive configuration is acceptable, click
Accept
to save the
configuration. Otherwise, click
Cancel
to end the operation and return to the
WebBIOS main menu, or click
Back
to return to the previous screens and
change the configuration.
20. If you accept the configuration, click
Yes
at the prompt to save the
configuration.
21. Click
Yes
at the prompt to start initialization.
Summary of Contents for PIKE 2108
Page 1: ...LSISAS RAID card PIKE 2108 User Guide ...
Page 8: ...viii ...
