Asus P8H67-M LE User Manual Download

Page: 69 / 76

Chapter 2: BIOS information

2-25

2.6.3

CPU Q-Fan Control [Enabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [600 RPM]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to disable or set the CPU fan warning speed.

Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to set the appropriate performance level of the CPU fan.

[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on

the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual] Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set

CPU Fan Profile

to [Manual].

CPU Upper Temperature [70ºC]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range

from 20ºC to 75ºC.

CPU Fan Max. Duty Cycle(%) [100%]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from

20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at

the maximum duty cycle.

CPU Lower Temperature [20ºC]

Use the <+> and <-> keys to adjust the lower limit of the CPU temperature. The values range

from 20ºC to 75ºC

CPU Fan Min. Duty Cycle(%) [20%]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from

0% to 100%. When the CPU temperature is under the lower limit, the CPU fan will operate at the

minimum duty cycle.

2.6.4

Chassis Q-Fan Control [Enabled]

[Disabled]

Disables the Chassis Q-Fan control feature.

[Enabled]

Enables the Chassis Q-Fan control feature.

Chassis Fan Speed Low Limit [600 RPM]

This item appears only when you enable the

Chassis Q-Fan Control

feature and

allows you to disable or set the chassis fan warning speed.

Configuration options: [Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

Summary of Contents for P8H67-M LE













































































Search results

Summary of Contents for P8H67-M LE

Reviews:

Related manuals for P8H67-M LE

Brands by name

Popular brands

Asus P8H67-M LE, User Manual

Search results

Summary of Contents for P8H67-M LE

Reviews:

Related manuals for P8H67-M LE

Brands by name

Popular brands