Asus P8B-E/4L User Manual Download Page 143

Page: 143 / 154

ASUS P8B-E/4L

6-19

6.4

VGA driver installation

This section provides the instructions on how to install the ASPEED Video

Graphics Adapter (VGA) driver.
You need to manually install the ASPEED VGA driver on a Windows

operating

system.
To install the ASPEED VGA driver:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support

DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run the support DVD.

3. Click the

ASPEED AST2050 Display Driver

to begin installation.

4. Click

Next

to start the installation.

Summary of Contents for P8B-E/4L



























































































































































Search results

Summary of Contents for P8B-E/4L

Reviews:

Related manuals for P8B-E/4L

Brands by name

Popular brands

Asus P8B-E/4L, User Manual

Search results

Summary of Contents for P8B-E/4L

Reviews:

Related manuals for P8B-E/4L

Brands by name

Popular brands