Asus P8B-E/4L User Manual Download Page 140

Page: 140 / 154

6-16

Chapter 6: Driver installation

6.3

LAN driver installation

This section provides the instructions on how to install the Intel

Gigabit LAN

controller drivers on the system.
You need to manually install the LAN contrroller driver on a Windows

operating

system.
To install the LAN controller drivers:
1. Restart the computer, and then log on with

Administrator

privileges.

2. Insert the motherboard/system support DVD to the optical drive. The support

DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

• Windows

automatically detects the LAN controllers and displays a New

Hardware Found window. Click

Cancel

to close this window.

• If Autorun is NOT enabled in your computer, browse the contents of the

support DVD to locate the file

ASSETUP.EXE

from the

BIN

folder. Double-

click the

ASSETUP.EXE

to run the DVD.

3. Click the

Intel

PRO/1000 Gigabit Adapters Driver

to begin installation.

Summary of Contents for P8B-E/4L



























































































































































Search results

Summary of Contents for P8B-E/4L

Reviews:

Related manuals for P8B-E/4L

Brands by name

Popular brands

Asus P8B-E/4L, User Manual

Search results

Summary of Contents for P8B-E/4L

Reviews:

Related manuals for P8B-E/4L

Brands by name

Popular brands