Asus P8B-C/4L User Manual Download Page 83

Page: 83 / 184

ASUS P8B-C series

4-17

Intel Virtualization Tech [Enabled]

The Intel

Virtualization Technology allows a hardware platform to run multiple

operating systems separately and simultaneously, enabling one system to virtually

function as several systems. Configuration options: [Disabled] [Enabled]

Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel

SpeedStep Technology (EIST).

Configuration options: [Disabled] [Enabled]

Turbo Mode [Enabled]

This item appears only when you set the

Enhanced Intel SpeedStep Technology

item to [Enabled] and allows you to enable or disable the Intel

Turbo Mode

Technology.

Configuration options: [Disabled] [Enabled]

CPU C1E [Enabled]

[Enabled]

Enables the C1E support function. This item should be enabled in

order to enable the Enhanced Halt State.

[Disabled]

Disables this function.

CPU C3 Report [Enabled]

Allows you to disable or enable the CPU C3 report to OS.

CPU C6 Report [Enabled]

Allows you to disable or enable the CPU C6 report to OS.

Package C State limit [No Limit]

Configuration options: [C0] [C1] [C6] [No Limit]

Summary of Contents for P8B-C/4L

























































































































































































Search results

Summary of Contents for P8B-C/4L

Reviews:

Related manuals for P8B-C/4L

Brands by name

Popular brands

Asus P8B-C/4L, User Manual

Search results

Summary of Contents for P8B-C/4L

Reviews:

Related manuals for P8B-C/4L

Brands by name

Popular brands