Asus P8B-C/4L User Manual Download Page 58

Page: 58 / 184

2-40

Chapter 2: Hardware information

13. ATX power connectors (24-pin ATXPWR1, 8-pin ATX12V1)

These connectors are for an ATX power supply plugs. The power supply

plugs are designed to fit these connectors in only one orientation. Find the

proper orientation and push down firmly until the connectors completely fit.

• DO NOT forget to connect the 24+8-pin power plugs; otherwise, the system

will not boot up.

• Use of a PSU with a higher power output is recommended when configuring

a system with more power-consuming devices. The system may become

unstable or may not boot up if the power is inadequate.

• This motherboard supports ATX2.0 PSU or later version.
• Ensure that your power supply unit (PSU) can provide at least the minimum

power required by your system.

Summary of Contents for P8B-C/4L

























































































































































































Search results

Summary of Contents for P8B-C/4L

Reviews:

Related manuals for P8B-C/4L

Brands by name

Popular brands

Asus P8B-C/4L, User Manual

Search results

Summary of Contents for P8B-C/4L

Reviews:

Related manuals for P8B-C/4L

Brands by name

Popular brands