Asus P735, Service Manual

Page: 71 / 74

CSC
■
Lv3Lv4 Repair Manual
- 79 - ASUS Proprietary
華
華
碩
碩
電
電
腦
腦
(10) BT position and testing point.
i. Make sure the RF probe is contact the resistor, BT output testing point1, (green circle)
properly, the output power will between
-5 ~ +3 dBm
normally.
ii. Next, measuring the BT output testing point2 (yellow circle) via RF probe, the output
power will between -5 ~ +3 dBm normally.
iii. If the output power still be abnormal, change the balance filter and go back to step
ii. (You should notice that the balance filter has its own orientation, so change it
carefully.)
iv. Afterwards, the BT output power still abnormal, change the BT chip.
.
P735 bottom view BT area
BT Output
testing point 1
Antenna
feed pin
BT Area
Balance Filter
BT Chip
BT Output testing point 2