4-50
Chapter 4: Software support
Intel
®
Matrix Storage Manager option ROM utility
The Intel
®
Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
®
Matrix Storage Manager option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v8.0.0.1027 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
[
MAIN MENU
]
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Exit
[
DISK/VOLUME INFORMATION
]
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Non-RAID Disk
1
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Non-RAID Disk
2
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Non-RAID Disk
3
XXXXXXXXXXX
XXXXXXXX
XX.XXGB
Non-RAID Disk
[
↑↓
]-Select
[ESC]-Exit [ENTER]-Select Menu
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
