Asus P6T WS PRO User Manual Download Page 163

Page: 163 / 194

ASUS P6T WS Professional

4-49

4.4.3

Intel

RAID configurations

This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 and Intel

Matrix

Storage configurations for Serial ATA hard disks drives through the Intel

ICH10R

Southbridge chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID

set(s). To do this:

1. Enter the BIOS Setup during POST.
2. Go to the

Main

menu, select

Storage Configuration

, then press <Enter>.

3. Select the item

Configure SATA as

, then press <Enter> to display the

configuration options.

4. Select [RAID] from the

Configure SATA as

item options, then press <Enter>.

5. Save your changes, then exit the BIOS Setup.

Refer to the system or the motherboard user guide for details on entering and

navigating through the BIOS Setup.

4.4.2

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.
2.  Connect the SATA signal cables.
3.  Connect a SATA power cable to the power connector on each drive.

Summary of Contents for P6T WS PRO



































































































































































































Search results

Summary of Contents for P6T WS PRO

Reviews:

Related manuals for P6T WS PRO

Brands by name

Popular brands

Asus P6T WS PRO, User Manual

Search results

Summary of Contents for P6T WS PRO

Reviews:

Related manuals for P6T WS PRO

Brands by name

Popular brands