background image

2-6

ASUS P5QL-VM DO/SI

Hard Disk Write Protect [Disabled] 

Disables or enables device write protection. This will be effective only if device is accessed 

throuh BIOS. Confiuration option: [Disabled] [Enabled]

IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices.  

Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

2.3.5 

System Information

This menu gives you an overview of the general system specifications. The BIOS 

automatically detects the items in this menu.

BIOS Information 

Displays the auto-detected BIOS information

Processor

Displays the auto-detected CPU specification

System Memory

Displays the auto-detected system memory

2.4 

Ai Tweaker menu

The Ai Tweaker menu items allow you to change the settings for system performance.

BIOS SETUP UTILITY

Main   

AI Tweaker

   Advanced    Power    Boot    Tools    Exit

Configure System Performance Settings

Ai Overclock Tuner 

 

 

[Auto]

DRAM Frequency 

 

 

[Auto]

Configure DRAM Timing by SPD   

[Enabled]

CPU VCORE Over-Voltage    

 

[Auto]

FSB Termination Voltage   

 

[Auto]

DRAM Voltage 

 

 

[Auto]

SB Over Voltage 

 

 

[Disabled]

NB Voltage 

 

 

[Auto]

Options

Manual

Auto

Ai Overclock Tuner [Auto]

Allows selection of CPU overclocking options to achieve desired CPU internal frequency. 

Select either one of the preset overclocking configuration options:

Manual

 - Allows you to individually set overclocking parameters.

Auto

 - Loads the optimal settings for the system.

Overclock Profile 

-  Loads the overclock profile.

Summary of Contents for P5QL-VM - DO/CSM Micro ATX Motherboard














































Reviews: