3.
USB device wake-up (3-pin USBPW7-10)
Set the jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
P5QL-VM DO
P5QL-VM DO USB Device Wake Up
2
1
2 3
+5V
(Default)
+5VSB
USBPW7-10
• The USB device wake-up feature requires a power supply that can provide 500mA on
the +5VSB lead for each USB port; otherwise, the system would not power up.
• The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
1.7
Connectors
1.7.1
Rear panel ports
1.
PS/2 Mouse port.
This port is for a PS/2 mouse.
2.
Video Graphics Adapter (VGA) port.
This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
3.
LAN (RJ-45) port.
This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table on the next page for the LAN port LED
indicators.
3
2
9
8
10
4 5
6
7
1
12
11
Chapter 1: Product introduction
1-10
Summary of Contents for P5QL-VM - DO/CSM Micro ATX Motherboard
Page 1: ...Motherboard P5QL VM DO ...
