Chapter 2: BIOS information
2-15
Change User Password
Select this item to set or change the user password. The
User Password
item on top of the
screen shows the default
Not Installed
. After you set a password, this item shows
Installed
.
To set a User Password:
1.
Select the
Change User Password
item and press
<Enter>
.
2.
From the password box, type a password composed of at least six letters and/or
numbers, then press
<Enter>
.
3.
Confirm the password when prompted.
The message
Password Installed
appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to
[Setup]
, BIOS checks for user password when accessing the Setup utility. When
set to
[Always]
, BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2.7
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press
<Enter>
to display the sub-menu.
ASUS EZ Flash 2
AI NET 2
Press ENTER to run
the utility to select
and update BIOS.
This utility doesn't
support :
1.NTFS format
BIOS SETUP UTILITY
Main Advanced Power Boot
Tools
Exit
2.7.1
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press
<Enter>
, a confirmation message
appears. Use the left/right arrow key to select between
[Yes
] or
[No]
, then press
<Enter>
to
confirm your choice. Please see section 2.1.3 for details.
2.7.2
AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self-Test
(POST). Configuration options: [Disabled] [Enabled]
Summary of Contents for P5KPL-AM IN
Page 1: ...Motherboard P5KPL AM IN ...
