Asus P5KPL-AM IN User Manual Download Page 32

Page: 32 / 40

2-8

ASUS P5KPL-AM IN

2.4.2

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the configuration options.

The Module Version and USB Devices Enabled items show the

auto-detected values. If no USB device is detected, the item shows None.

USB Functions [Enabled]

Allows you to enable or disable the USB functions.Configuration options: [Disabled] [Enabled]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to

[Auto]

allows

the system to detect the presence of USB devices at startup. If detected, the USB controller

legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12

Mbps). This item appears only when you enable the USB 2.0 Controller item.

Configuration options: [FullSpeed ] [HiSpeed ]

2.4.3

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

CPU Ratio Setting [Auto]

Sets the ration between CPU core clock and the FSB frequency.

If an invalid ratio is set in CMOS, then the actual and set values may differ.

Key in ratio numbers directly.

C1É Support [Enabled]

Enable this item and users can configure the “Enhanced Halt State” function.

Configuration options: [Disabled] [Enabled]

Max CPUID Value Limit [Disabled]

Enable this item to boot legacy operating systems that cannot support CPUs with extended

CPUID functions. Configuration options: [Disabled] [Enabled]

Vanderpool Technology [Enabled]

Enable this item when the processor supports Vanderpool technology. Users need to reset

the computer to change the configuration of this item. Configuration options: [Disabled]

[Enabled]

Summary of Contents for P5KPL-AM IN









































Search results

Summary of Contents for P5KPL-AM IN

Reviews:

Related manuals for P5KPL-AM IN

Brands by name

Popular brands

Asus P5KPL-AM IN, User Manual

Search results

Summary of Contents for P5KPL-AM IN

Reviews:

Related manuals for P5KPL-AM IN

Brands by name

Popular brands