Asus P5KPL-AM IN User Manual Download Page 34

Page: 34 / 40

2-10

ASUS P5KPL-AM IN

South Bridge Configuration
Audio Controller [Azalia]

Allows you to set the audio controller. Configuration options: [Azalia] [All Disabled]

Front Panel Support Type [HD Audio]

Allows you to select the front panel support type. If High Definition Audio Front Panel

used, please set HD Audio mode. Configuration options: [AC97] [HD Audio]

2.4.5

Onboard Devices Configuration

Onboard PCIE 10/100M LAN [Enabled]

Allows you to enable or disable the onboard LAN controller.

Configuration options: [Enabled] [Disabled]

LAN Option ROM [Disabled]

Allows you to enable or disable the boot ROM in the onboard LAN controller. This item

appears only when the Onboard LAN item is set to Enabled. Configuration options:

[Disabled] [Enabled]

2.4.6

PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA

devices, and setting the memory size block for legacy ISA devices.

Take caution when changing the settings of the PCI PnP menu items. Incorrect field values

can cause the system to malfunction.

Plug and Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you

install a Plug and Play operating system, the operating system configures the Plug and Play

devices not required for boot.

Configuration options: [No] [Yes]

PCI Latency Timer [64]

Allows you to select the value in units of PCI clocks for the PCI device latency timer register.

Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]

Allocate IRQ to PCI VGA [Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ.

When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested.

Configuration options: [Yes] [No]

Palette Snooping [Disabled]

When set to [Enabled], the pallete snooping feature informs the PCI devices that an

ISA graphics device is installed in the system so that the latter can function correctly.

Configuration options: [Disabled] [Enabled]

Summary of Contents for P5KPL-AM IN









































Search results

Summary of Contents for P5KPL-AM IN

Reviews:

Related manuals for P5KPL-AM IN

Brands by name

Popular brands

Asus P5KPL-AM IN, User Manual

Search results

Summary of Contents for P5KPL-AM IN

Reviews:

Related manuals for P5KPL-AM IN

Brands by name

Popular brands