Asus P5K DELUXE User Manual Download Page 139

Page: 139 / 172

ASUS P5K Deluxe

5-31

5.4.2

Intel

RAID configurations

This motherboard supports RAID 0 and RAID 1 configurations for Serial ATA hard

disks drives through the Intel

ICH9R Southbridge chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID

set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the Main Menu, select

SATA Configuration

, then press <Enter>.

3. Select the item

Configure SATA As

, then press <Enter> to display the

configuration options.

4. Select [RAID] from the

Configure SATA As

item options, then press <Enter>.

5. Select the item Onboard Serial-ATA BOOTROM, press <Enter>, then select

Enabled from the options.

6. Save your changes, then exit the BIOS Setup.

Refer to the system or the motherboard user guide for details on entering and

navigating through the BIOS Setup.

5.4.1

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.
2.  Connect the SATA signal cables.
3.  Connect a SATA power cable to the power connector on each drive.

Summary of Contents for P5K DELUXE













































































































































































Search results

Summary of Contents for P5K DELUXE

Reviews:

Related manuals for P5K DELUXE

Brands by name

Popular brands

Asus P5K DELUXE, User Manual

Search results

Summary of Contents for P5K DELUXE

Reviews:

Related manuals for P5K DELUXE

Brands by name

Popular brands