Asus P5G43 V4-Series User Manual Download Page 25

Page: 25 / 110

2-7

ASUS V4-Series P5G43

7. Close the load plate (A), then push

the load lever (B) until it snaps into

the retention tab.

6. Apply several drops of Thermal

Interface Material to the exposed

area of the CPU that the heatsink will

be in contact with, ensuring that it is

spread in an even thin layer.

DO NOT

eat the Thermal Interface Material. If it gets into your eyes or touches

your skin, ensure that you wash it off immediately, and seek professional

medical help.

Some heatsinks come with

preapplied thermal paste. If so,

skip this step.

To prevent contaminating the thermal paste,

DO NOT

spread it with your finger

directly.

The motherboard supports Intel

LGA775 processors with the Intel

Enhanced

Intel SpeedStep

Technology (EIST) and Hyper-Threading Technology.

Summary of Contents for P5G43 V4-Series















































































































Search results

Summary of Contents for P5G43 V4-Series

Reviews:

Related manuals for P5G43 V4-Series

Brands by name

Popular brands

Asus P5G43 V4-Series, User Manual

Search results

Summary of Contents for P5G43 V4-Series

Reviews:

Related manuals for P5G43 V4-Series

Brands by name

Popular brands