manualshive.com logo in svg

Asus P5E-VM - Motherboard - Micro ATX, User Manual, Page: 80 / 156

Share
Download
Asus P5E-VM - Motherboard - Micro ATX User Manual Download Page 80

4-14

Chapter 4: BIOS setup

PIO Mode [Auto]

Selects the PIO mode.  

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] 

[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] 

[UDMA3] [UDMA4] [UDMA5] 

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. 

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.  

Configuration options: [Disabled] [Enabled]

SATA Configuration

SATA Configuraton 

 

[Enhanced]

  Configure SATA as 

 

[IDE]

Hard Disk Write Protect   

[Disabled]

SATA Detect Time Out (Sec) 

[35]

4.3.6 

SATA Configuration

The items in this menu allow you to set or change the configurations for the SATA 

devices installed in the system. Select an item then press <Enter> if you want to 

configure the item.

Options

Disabled

Compatiable

Enhanced

SATA Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA as [IDE]

Sets the configuration for the Serial ATA connectors supported by the 

Southbridge chip. Configuration options: [IDE] [RAID] [AHCI]

The AHCI allows the onboard storage driver to enable advanced Serial 

ATA features that increases storage performance on random workloads by 

allowing the drive to internally optimize the order of commands.

Summary of Contents for P5E-VM - Motherboard - Micro ATX





























































































































































Reviews:

No comments